Wear measurement of machine spare parts

ONLINE SPARE PARTS STOCK

Need to arrange wear measurement of machine spare parts?
We are here for you — quickly, professionally
and with a personal approach.

Tomáš Holík

+420 777 320 261
holik@borra.cz

Measurement that helps you decide in time

Wear measurement of machine spare parts for injection moulding machines and extruders is useful both as a preventive measure and when a problem has already appeared in production. Predictive measurement helps you identify wear early and prevent downtime or reduced quality. If you are already dealing with a problem, you gain accurate data for deciding whether to continue operation, repair the part or replace it.

Clear data for the next technical solution

The output of the service is a wear measurement report for the machine spare part and a recommendation for the next steps. Based on the measured values, our technician will recommend a suitable technical solution and, if needed, arrange the order of a new spare part with you directly.

How wear measurement of machine spare parts works

Domluvíte si termín s Borra technikem

Measurement is useful both preventively and when a problem has already appeared in production. The measurement date is arranged according to your operation and the condition of the machine.

Připravíte náhradní díly
na měření

The machine must be shut down, the screw removed, the barrel cleaned and all parts cooled to a maximum of 50 °C.

Provedeme měření opotřebení

A technician measures the wear — approx. 1 hour, evaluates the condition of the parts and recommends the next technical solution or the supply of a stock part.

Vystavíme protokol a doručíme nový náhradní díl

We manufacture a new machine spare part to order or supply one directly from stock, and deliver everything within 3 days.

Contact our technician for wear measurement of machine spare parts

Tomáš Holík
Mechanical & Application Engineer

+420 777 320 261
holik@borra.cz

What we evaluate during measurement

We evaluate the wear condition of the screw, barrel and other measured parts, the extent of technical wear and whether continued operation or replacement is recommended.

What needs to be prepared before the technician arrives at your production site

machine shut down

Screw removed
Barrel may remain in the machine
All parts cleaned and cooled to a maximum of 50 °C

Order wear measurement
and gain accurate data for your next decision on operation or part replacement.